TOHATSU BFT200A Скачать руководство пользователя страница 9

Страница: 9 / 128

OUTBOARD MOTOR SAFETY

IMPORTANT SAFETY

INFORMATION

The TOHATSU BFT200A/225A

outboard motor is designed for use

with boats that have a suitable

manufacturer’s power

recommendation. Other uses can

result in injury to the operator or

damage to the outboard motor and

other property.

Most injuries or property damage can

be prevented if you follow all

instructions in this manual and on the

outboard motor. The most common

hazards are discussed in this chapter,

along with the best way to protect

yourself and others.

Operator Responsibility

• It is the operator’s responsibility to

provide the necessary safeguards to

protect people and property. Know

how to stop the engine quickly in

case of emergency. Understand the

use of all controls.

• Stop the engine immediately if

anyone falls overboard, and do not

run the engine while the boat is

near anyone in the water.

• Always stop the engine if you must

leave the controls for any reason.

• Attach the emergency stop switch

lanyard securely to the operator.

• Always wear a PFD (Personal

Flotation Device) while on the

boat.

• Familiarize yourself with all laws

and regulations relating to boating

and the use of outboard motors.

• Be sure that anyone who operates

the outboard motor receives proper

instruction.

• Be sure the outboard motor is

properly mounted on the boat.

• Do not remove the engine cover

while the engine is running.

31ZY2T000.book 7 ページ２０１３年１０月１６日　水曜日　午前１１時４０分

Содержание BFT200A
































































































































Результаты поиска

Содержание BFT200A

Отзывы:

TOHATSU BFT200A, Руководство пользователя, Страница: 9 / 128

Результаты поиска

Содержание BFT200A

Отзывы: