TOHATSU BFT200A, Руководство пользователя

Страница: 60 / 128

58
SERVICING YOUR OUTBOARD MOTOR
MAINTENANCE SCHEDULE
Follow the MAINTENANCE SCHEDULE table and service your outboard motor accordingly.
(1) Lubricate more frequently when used in salt water.
(2) These items should be serviced by your servicing dealer, unless you have the proper tools and are mechanically proficient. Refer to the TOHATSU Service
Manual for service procedures.
(3) For professional commercial use, log hours of operation to determine proper maintenance intervals.
(6) Replace the anodes when they have been reduced to about two-thirds of their original size, or if they are crumbling.
Each use After use
First month
or
20 hrs.
Every
6 months
or
100 hrs.
Every year
or
200 hrs.
Every
2 years
or
400 hrs.
Every
6 years
or
1,200 hrs.
Engine oil Check level o
Change o o
Engine oil filter Replace o (2)
Gear case oil Change o (2) o (2)
Timing belt Check-adjust o (2)
ACG belt Check-adjust o (2)
Throttle linkage Check-adjust o (2) o (2)
Valve clearance Check-adjust o (2)
Spark plug Check o
Replace o
Propeller and cotter pin Check o
Anode metal (Outside engine) Check o
Anode metal (Inside engine) Sleeve Check o (2)
Exhaust manifold Check o (2)
(6) V bank bottom Replace o (2)
Idle speed Check-adjust o (2) o (2)
Lubrication Grease o (1) o (1)
REGULAR SERVICE PERIOD (3)

Perform at every indicated month or operating
hour interval, whichever comes first.
ITEM
31ZY2T000.book 58 ページ ２０１３年１０月１６日 水曜日 午前１１時４０分