TOHATSU BFT 75A, Руководство пользователя

Страница: 94 / 160

92
SERVICING YOUR OUTBOARD MOTOR
(2) These items should be serviced by your servicing dealer, unless you have the proper tools and are mechanically proficient. Refer to the TOHATSU service manual for service
procedures.
(3) For professional commercial use, log hours of operation to determine proper maintenance intervals.
(4) When operating in salt water, turbid or muddy water, the engine should be flushed with clean water after each use.
(5) Upon starting, check for unusual engine sounds and cooling water flowing freely from the check hole.
(7) Check the fuel line for leaks, cracks or damage. If it is leaking, cracked or damaged, take it to your servicing dealer for replacement before using your outboard.
(8) Replace the fuel line if there are signs of leaks, cracks or damage.
REGULAR SERVICE PERIOD (3)
Perform at every indicated month or operating
hour interval, whichever comes first.
ITEM
Each use After use
First month
or
20 hrs.
Every
6 months or
100 hrs.
Every year
or
200 hrs.
Every 2 years
or
400 hrs.
Refer
to page
Fuel filter
(Low pressure side)
Check o
111-113
Replace o
Fuel filter
(High pressure side)
Check
o
(2) -
Replace
o
(2)
-
Fuel tank and tank filter Clean o 114
Fuel line
Check
o
(7)
-
Replace Every 2 years (If necessary) (2) (8) -
Thermostat Check
o
(2)
-
Battery and cable connection Check level-tightness o -
Bolts and nuts Check-tightness
o
(2)
o
(2) -
Breather tube Check
o
(2)
-
Cooling water passages Clean
o
(4)
o
(4)
-
Coolant leak Check o 117
Water pump Check
o
(2)
-
Emergency stop switch Check o 52
Engine oil leak Check o 52
Each operation part Check o -
Engine condition (5) Check o -
Power trim/tilt Check
o
(2)
-
Shift cable Check-adjust
o
(2)
-