© TOGU GmbH
Infos auf
- Service Nummer: +49 (0) 8051 9038-0
Manual and maintenance instructions Airgo
®
Active cushion / Comfort
Congratulations on your purchase of the Airgo
®
Active cushion / Comfort.
With the Airgo
®
Active cushion / Comfort you have chosen a TOGU brand product made in
Germany.
It was produced in compliance with valid EU norms and contains no forbidden phthalates and
no heavy metals.
De-inflate:
Fold over the half of the Airgo
®
Active cushion / Comfort with the vale, insert the lightly moistened
tip of the needle into the valve and allow air to escape by pinching it gently
(It is not necessary to screw the pump onto the needle for this purpose.
Attach the needle (stored in the pump handle) to the end of the
pump and moisten the tip of the needle slightly. Fold over the
half of the Airgo
®
Active cushion / Comfort with the valve,
insert the tip of the needle into the valve and pump.
Position:
Tip the seat of your chair slightly backwards.
Place the Airgo
®
Active cushion / Comfort
about 5 cm away from the back of the chair
on the seat.
Make sure your knees are slightly above your buttocks when you are seated. Avoid tipping the seat
surface towards the front (see figure at the right).
Equipment details:
The Airgo
®
Active cushion / Comfort assumes body temperature after only a few minutes.
The odor of the new Airgo
®
Active cushion / Comfort dissipates within a short time as in a new car.
Measure: 40x28 cm - Load: ca. 200 kg
Care:
Use a mild agent for cleaning plastic surfaces such as Eco-Power-Cleaner for gentle cleaning of the
Airgo
®
Active cushion / Comfort. Avoid contact with sharp or pointed objects. Use only the pump
supplied with the cushion together with its needle attachment to avoid damage to the valve.
Proper inflation volume:
Too much air
Not enough air
Just right
