Todd English PRO-SMART 38051, Руководство пользователя

Страница: 27 / 36

n
uwavenow.com | 27
Stage
Stage cooking allows you to alter the
temperature for different lengths of time
throughout the cooking process, giving
you greater control over the final results.
You can program up to 5 of these cooking
stages, adding Preheat, Sear, Warm.
Delay, and Delay E as needed. Please
note that none of these functions can be
used independently as one of the stages.
To use the Stage function:
1. Press Stage for Stage 1. The default
is 350°F for 15 minutes. Make any
adjustments to the temperature and
time.
2. Press Stage again for Stage 2. The
default for Stages 2–5 is 350°F and
00:00 minutes. Adjust the temperature
and time.
3. Repeat until all Stages have been
entered, then press START/PAUSE to
begin cooking. When finished, the unit
will beep 3 times and display “End” .
4. If using the Probe, press Stage for
Stage 1. then press and hold Probe
and “OFF” will be displayed. Press
and hold Probe again for the default
Probe target temperature of 165°F.
Adjust this as needed.
5. Press Stage for Stage 2 and “OFF”
will appear. Press and hold Probe ,
and 165°F will appear. Adjust the
temperature as needed.
6. Repeat for Stages 3–5* as needed.
7. Press START/PAUSE to begin
cooking. When finished, the unit will
beep 3 times and display “End” .
Notes
• Once the final target probe
temperature is achieved, the cooking
will be finished, regardless of the
remaining stages.
• When using the Probe, press Temp/
Time for time, 00:00 will flash then
“on:” will appear.
Sear
The Sear function uses the top & bottom
heaters to seal in flavor and juices. You
can sear your meat before, after, or both
before and after, the regular cooking
stages. Sear temperatures and times can
be adjusted prior and during the searing
process.
• Default Sear Settings: 450°F, 5-minutes.
• Selectable Sear Temperature Range:
50°F–450°F.
• Selectable Sear Time Range:
0-minutes–30-minutes (00:00–00:30.)
Principle of Sear 1, Sear 1 & 2, Sear 2
• Sear 1: Is ALWAYS the function right
BEFORE the regular cooking stages.
• Sear 1 & 2: Is ALWAYS right BEFORE
and right AFTER the regular cooking
stages.
• Sear 2: Is ALWAYS right AFTER the
regular cooking stages.
Using Sear (1, 1 2, and 2)
Press Sear once for Sear 1, press it twice
for Sear 1 & 2, and three times for Sear 2.
1. Select the cooking function and make
any changes to the temperature and
time, if needed.
2. Press Sear until you reach the Sear
you need (1, 1 & 2, or 2).
3. Make any adjustments to the Sear
temperature and time.
The Todd English Pro-Smart Grill offers
advanced features for experienced
cooks trying to achieve very specific
results. These complex features are not
needed to achieve amazing results ,
which even the most inexperienced cook
can realize with only the unit’s basic
cooking functions. Novice cooks should
not use the advanced features, and those
novices who try them out should do so
with great care.
ADVANCED FUNCTIONS