Todd English PRO-SMART 38051, Руководство пользователя

Страница: 20 / 36

20 | nuwavenow.com
Notes
• Turn the START/PAUSE dial to
adjust the percentage of Top and
Bottom heat. Both will adjust at the
same time equaling 100%. When
the dial is turned completely left,
the bottom is 100% and top is 0%.
When the dial is turned completely
right, the Top is 100% and the
bottom 0%.
• The preheat can be cancelled at
any time.
Probe
The Probe allows you to cook according
to the internal temperature of your food,
ensuring that it is done to perfection. The
Probe defaults to OFF.
• The Probe temperature is adjustable in
1F increments.
• The Probe Temperature Reading
Range 32°F–400°F.
• The Probe Target Temperature Setting
Range is OFF, 50°F–212°F.
Using the Probe
1. Connect the Probe to the probe jack,
then insert the Probe into the center of
the food.
2. Press Probe . The screen will display
“Probe” and the current Probe
temperature.
3. Press and hold Probe and the display
will show “Probe” , “Temp” , and
“OFF” (Probe default). Press and hold
Probe again to set it to 165°F.
4. Turn the
START/PAUSE
dial to adjust
the Probe target temperature if needed.
5. Press START/PAUSE . The unit will
start to cook to the set Probe target
temperature.
• While cooking, press
Probe
and
the unit will display the current
Probe temperature and “Probe” .
• Press Temp/Time and it will display
the set temperature and
“Probe”
.
• If the Probe is turned off, the unit
will default to remaining cook time
and set temperature.
• Press and hold Probe to display
the Probe target temperature,
which can then be adjusted by
turning the START/PAUSE dial.
• Once the temperature is adjusted,
it will remain on display.
6. When the internal temperature of the
food reaches 10°F under the Probe
target temperature, the unit will alert
with 3 sets of short beeping sounds.
This carryover cooking alert will happen
every time the Probe is in use (see
Carryover Cooking below).
Notes
• If the cooking time is finished but the
Probe target temperature is not yet
reached, cooking will continue until it is.
• If cooking began without the Probe, but
the Probe is added during the cooking
cycle, press Probe to see the current
Probe temperature. To adjust the Probe
target temperature, press and hold
Probe and use the START/PAUSE dial
to adjust the Probe target temperature.
• When stage cooking, each stage can
have different Probe target temperature
and cook temperature. The unit shall
cook each stage until the Probe target
temperature for that stage is achieved
and then move on to the next stage.
• Once the final Probe target temperature
is reached, the cooking cycle will finish,
and the unit will beep three times
(2 short, 1 long) regardless of the
BASIC FUNCTIONS