today's baby LANGSTON, Инструкция по эксплуатации

Страница: 8 / 9

7
CONVERTING TO A DAY BED
Page 8 of 9
8
CONVERTING TO A TODDLER BED
Remove the Intermediate Guardrail (C) from each side. Plug the open holes in the Guardrail Sides (B)
using eight 28mm Bolts (J) and eight 16mm Nuts (P).
Re-attach the mattress support in the highest position by bolting each
Headboard to the mattress support using four 60mm Bolts (M). Next,
attach the mattress support to the Guardrail Sides using the four
Cushion Blocks (R) and four 54mm Bolts (L) forming the toddler bed.
Leave the mattress support in the highest position. Remove both Guardrail Sides from ONE side
of the unit and store them for future use.
Attach an Intermediate Guardrail to the opposite side using four
70mm Bolts (N) and four 16mm Nuts (P), forming a day bed as
shown in the diagram.
Plug the open holes in each Headboard and in the
mattress support using six 18mm Bolts (H)
and two 16mm Nuts (P).
(P) 16mm Nut
(8 pcs)
(J) 28mm Bolts
(8 pcs)
(M) 60mm Bolts
(4 pcs)
(R) Cushion Block
(4 pcs)
M
M
(P) 16mm Nut
(6 pcs)
(N) 70mm Bolts
(4 pcs)
(H) 18mm Bolts
(6 pcs)