© by WilTec Wildanger Technik GmbH
Item 63044
Page 11
http://www.toboli.com
05 2022-1
Step
9
Attach the barbell clamps
(U)
to the barbell brackets.
Step
10
Insert the long bar (with foam cap)
(H)
into the adjustment lever
(N).
Then slide one large foam cap
(P)
on either end of the long bar. Set the entire assembly
(H, N, O)
into the front support and secure it with
the ring pin
(W).
Finally, set the spring clamps
(Q)
in as shown.
Important Note:
Reproduction and any commercial use (of parts) of this operating manual, requires a written permission
of WilTec Wildanger Technik GmbH.
