Tobii X2-30, Руководство пользователя

Страница: 11 / 42

4 Setting Up the X2 Eye Tracker
The main steps you need to perform in order to set up and configure the Tobii X2 Eye Tracker are:
1. Check that you have all the components needed — read 2 Hardware Package Content, page 2.
2. Check the prerequisites in 4.1 Prerequisites, page 5.
3. Mount the X2 Eye Tracker, according to the setup that you will use — read 4.2 Mounting the Eye Tracker, page 5.
4. Install the prerequisites from the provided USB memory stick — read
4.3 Tobii Eye Tracker Installer, page 8.
5. Run the configuration software — read 5 The X Configuration Tool, page 15.
6. Install the supported eye tracking software, such as Tobii Studio or the Tobii SDK.
You can also watch the instructional video on the provided USB memory stick —
Installation and Basic Configuration
Tobii X2 Eye Trackers.mp4 — for the main setup and configuration steps to be performed when installing the Tobii X2
Eye Tracker.
4.1 Prerequisites
Before starting to mount and use your Tobii X2 Eye Tracker, you need to make sure that:
• Your computer is compatible with the software that you are going to use (Tobii Studio or other eye tracking software).
The latest version of the Tobii System Requirements and Recommendations document is available on the Tobii website
at
www.tobii.com .
• You have administrator rights for the computer that you are using in order to be able to install and run the installation and
configuration software.
• The screen used for presenting the stimuli has a proper size and form factor to be used with the eye tracker that you have.
Please read
Appendix B Recommended Display Sizes, page 28
• You are using either Windows 7 or Windows 8 as an operating system.
• The firewall(s) that you might have on the computer allow access for the eye tracking software.
• You are using USB 2.0. The Tobii X2 Eye Tracker does not support the USB 3.0.
• Always try out the Tobii X2 Eye Tracker before attaching it permanently to the screen in order to make sure that it works
properly in conjunction to your screen.
4.2 Mounting the Eye Tracker
This section describes the steps you need to perform in order to assemble and mount the X2 eye tracker, depending on the set-
up type:
• 4.2.1 Mounting the Tobii X2 Eye Tracker to a Screen, page 5.
• 4.2.2 Mounting the Tobii X2 Eye Tracker Using a Desk Stand/Tripod, page 8.
4.2.1 Mounting the Tobii X2 Eye Tracker to a Screen
For mounting the Tobii X2 Eye Tracker to a laptop or monitor you use one of the adhesive mounting brackets provided in the
standard package or in the additional mounting brackets kit (accessories).
Standard package mounting brackets
Tobii X2-30 Eye TrackerUser ’ s manual v.1.0.3 - en-US
4 Setting Up the X2 Eye Tracker
5