9.
8.
Automatic Drip Coffeemaker Use and Care Guide
Setting The Clock With AM/PM Indicator
1. Plug the power cord into a wall outlet. The Display will flash until
time of the day is set.
NOTE: A power failure will also cause the Display to flash and it
will be necessary to reset the clock.
2. To set the clock, press the PROGRAM Button until "Set Time"
appears in upper left corner. Press the HOUR button to set correct
Hour, noting AM/PM. Press the MIN Button to set correct minutes.
Setting The Timer
1. Press the PROGRAM Button twice and display will show “Set
Timer” in upper right corner of the Digital Display. Press and hold
the HOUR Button until the correct hour is displayed for the brew
time you would like to set, noting that PM is indicated on the left
corner of the display. Indicator Display will go off in 5 seconds.
2. Press the MIN Button until the correct minute is displayed for the
the brew time you would like to set.
3. After the brew time is set, press AUTO Button once. The AUTO
light will illuminate indicating that your Coffeemaker is ready to
begin brewing at the pre-programmed time. Indicator Display will
go off in 5 seconds.
To Start Brewing Coffee Immediately
Press the Power Select Button. The Power Light will illuminate as the
Coffeemaker begins brewing the coffee.
To Start Brewing Coffee
At The Pre-programmed Time
At the preprogrammed time, the Coffemaker will turn itself on
automatically. The Power Light will turn on as the Coffeemaker
begins brewing and coffee will begin flowing into the Carafe.
Special Instructions For Model
TCM12CD And TCM12CDCAN
With Electronic Timer And Auto-Off
Setting The Digital Display/Timer
Control Panel
1. Digital Display: Clock with AM/PM Indicator Program.
2. AUTO Button: Allows you to program the Timer for AUTO BREW
so that your brewing will begin at the selected time. Press to
change AUTO BREW time.
3. AUTO Light: Illuminates when AUTO BREW has been set, and the
Coffeemaker is ready to begin brewing at the pre-programmed time.
4. HOUR Button: Advances the HOUR: use to adjust time in hours
for Clock Display and AUTO BREW programming.
5. MIN. Button: Advances the MINUTES: Use to adjust time in
minutes for Clock Display and AUTO BREW programming.
6. Program Button: Allows you to set the delayed brewing time and
time of day.
7. Power Select Button (O/I): Press once (the Power Light will
illuminate) to begin brewing coffee immediately. Pressing the
button again will turn the Coffeemaker OFF.
8. Power Light: Illuminates when the Coffeemaker is in operation.
1.
2.
3.
4.
7.
8.
6.
5.
