GROUNDED PLUG
To reduce the risk of electric shock this appliance has a grounded plug.
(2 blades and 1 pin) If the plug does not fit fully into the electrical outlet contact
a qualified electrician. Do not modify the plug in any way or use an adaptor.
BEFORE FIRST USE
1. Read all instructions carefully and keep them for future reference.
2. Remove all packaging.
3. Install the Filter. (See Care and Cleaning section)
4. Water boiled for the first time should be discarded.
INSTRUCTIONS FOR USE
1. Install the Filter, if not already in place. Never use this kettle without the
filter. Removal of the Filter may prevent the Kettle from shutting off.
2. Open the Lid by sliding the latch towards the handle and lifting upward.
Fill the Kettle through the Lid opening, with a minimum of .8 litres of water.
DO NOT attempt to fill the Kettle while it is on the Power Base.
DO NOT use for other than boiling water. Other liquids will contaminate
the interior of the Kettle. DO NOT fill past the MAX level indicated inside
of the Kettle or in the water level window. Overfilling may cause water
to spill out when boiling.
3. Close Lid. Note: The Lid should not be opened when the Kettle is hot.
4. Place Kettle on the Base making sure it is correctly engaged on its base.
5. Plug Power Base cord into a 120V AC wall outlet. Note: Never plug
power base with empty Kettle into the electrical outlet.
6. Depress the red On/Off Switch and the red indicator light in the water
level window will light up to indicate that the Kettle is in the boil cycle.
Once the water has boiled, the On/Off Switch will move to the 'Off' position
and the light will go out. NOTE: If the Kettle is lifted off the Power Base
at any time during the boil cycle, the Kettle will automatically shut off.
The On/Off Switch will move to the Off position and the light will go out.
3
Booklet TJK-55-v004 4/20/04 3:44 PM Page 9
