manualshive.com logo in svg

Toa VP-1061, Руководство по эксплуатации

Поделиться
Скачать
Toa VP-1061 Скачать руководство пользователя страница 9

9

Connector Connections
Step 1.

Loosen the terminal screw, then insert the cable.

Step 2.

Retighten the terminal screw.

Note

Pull on the cable lead to ensure it is securely connected.

Tightens

Loosens

Terminal screw

Slotted screwdriver

Shielded cable

Removable terminal 
plug

1

1

2

Hot

Cold

Earth

Bit shape  3 mm

8. REMOVABLE TERMINAL PLUG CONNECTION

Note

• Avoid soldering cable conductor, as contact resistance may increase when the cable is tightened and the

solder is crushed, possibly resulting in an excessive rise in joint temperatures.

• Usable cables of AWG 16 - 28.

Cable end treatment

Shielded cable

7 mm

20 mm

• When mounting 2 or more units in an equipment rack, be sure to mount a perforated panel larger than 1U

size above every 2 stacks of amplifiers as shown in the figure.

*1U size = 44.5 mm (standard size)

• It is recommended that a supporting runner be installed to the rack so that the unit can be easily drawn from

the front of the rack for maintenance purpose. 
For the installation procedures of the supporting runner, please contact manufacturer for the rack to be used.

VP-1241 or
VP-1361

VP-1061 or
VP-1121

Perforated panel

Tip

Recommended slotted screwdriver: Screwdriver with blade that is 3 mm in width.

Содержание VP-1061













Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды