FRONT PANEL FACILITIES
CHANNEL key-Use this key to select the
program output. Pressing the key causes
the corresponding channel indicator on
the right side of each key to come on.
DAY key-This key is used to register a
weekly program. Press the key, and
the DAY indicators flash, allowing a
day of the week to be set with the day
setting under each indicator.
TIME key-Press this key to register
the clock program, and the clock
display flashes. Set hours with the
clock settings under the display.
PAUSE key-When it is desirable to stop the clock
operation temporarily on a certain day because that
day falls on a holiday, this can be accomplished by
using this key. After pressing this key (the day
indicators flash), press the desired day setting.
AUTO/OFF switch-Each individual output channel
can be connected and disconnected with this
switch. Setting the switch to ON allows the output
channel of that switch to operate at the programed
time. When set to OFF, the output operation stops.
Output identification label-This
label is supplied with unit. Write
the names of programs of or
equipment connected to each
output channel in the label.
STORE key-Press this key to store the
day of the week or hours set under the
day, time or pause mode.
MANUAL switch-Use this switch to
manually deliver the output
regardless of actual program.
Pressing this switch connects a
relay contact for five seconds.
1. The connected equipment can be
manually activated with this switch
regardless of program as well as
position of the AUTO/OFF switch.
2. This switch cannot be operated
during power outage.
No programs can be stored in a built-in
memory unless the memory key is
pressed.
CHECK key-This key checks the day of the week or hour for
proper registration. The corresponding date indicator comes
on when checking the day of the week. Also, each time the
CHECK key is pressed, the clock display shows the
programed times from the earliest hour to the latest in
sequence.
CANCEL key-This key cancels the stored day of the
week or hour. To cancel the day of the week, press
the CHECK key to call up the day of the week and
cancel it with the CANCEL key. Similarly, the stored
hour can be cancelled with both the CHECK and
CANCEL keys.
4
All manuals and user guides at all-guides.com
