8
10. ChANGE FROm SINGLE- TO BI-AmPLIFIER DRIvE
The SR-F09 can be driven by bi-amplifiers if wiring of their internal connectors is changed. When using these
speakers in combination with the SR-L09, its internal wiring must also be changed.
10.1. Changing Internal Wiring
10.1.1. SR-F09
Step 1. Remove front grille fixing screws (4 places) to
remove the front grille.
Step 2. Remove horn fixing screws (8 places) to
remove the horn
Step 3. Disconnect connectors inside an enclosure.
Step 4. Connect a connector having a marker on
it to a similarly marked connector, and
an unmarked connector to an unmarked
connector.
Step 5. Replace the horn using screws.
Step 6. Replace the front grille using front grille fixing
screws.
Horn removed.
Connector
Front grille
Front grille
fixing screw
Connector
Marker
