The RX-31C is designed to be used either console style or to be rack-mounted,
using a pair of optional brackets (model MB-701). The following procedure should
be followed to rack-mount the mixer using the MB-701.
1. Remove both side panels and armrest. (Remove 6 screws securing each side
panel).
Side Panel
Side Panel
Armrest
2. Mount the MB-701 brackets on both sides of the chassis. (Use the screws
removed from the side panel to secure the brackets).
MB-701 Bracket
MB-701 Bracket
3. The rear panel and blank panel should now be changed in position to easily
accept equipment connections on the RX-31C in the rack.
4. Reverse the positions of the rear panel and blank panel, as shown below.
Front Panel
Front Panel
Rear Panel
Corner Frame
Blank Panel
Corner Frame
Power Chassis
Blank Panel
Power Chassis-
Rear Panel
a. Remove the rear panel, corner frame and blank panel,
b. Put the rear panel in the original position of the blank panel,
c. Put the corner frame back in place.
d. Put the blank panel in the original position of the rear panel and take off the
rubber feet.
– 5 –
Rack Mounting Instructions
All manuals and user guides at all-guides.com
all-guides.com