3
2. GENERAL DESCRIPTION
The RS-410EC e is an Information-/Emergency-Call Intercom substation, to be connected to the N-8400RS
4-wire Substation Interface Unit.
The substation is designed to be used in public areas under rough environmental conditions. It is impact proof
(IK10) and weather resistant (IP65) and therefore vandal proof. The operating temperature ranges from -10°C
up to + 50°C.
The front plate is made of brushed aluminum. The red emergency call button (illuminated if pressed) is
protected by a pane and can get highest call priority if programmed via Selective Response Mode + Priority
5. The metallic info-call button gets lower priority (1-4) and is intended for informational calls. It features 2
different programable call targets each one individual target per button.
Emergency calls are listed in position one of the call queue on the master station (N-8000MS/N-8600MS) and
in addition are signalled by a sound.
3. FEATURES
• Two different priotity-levels: Emergency and standard calls.
• Emergency calls can be forwarded to a security post.
• Vandal Proof.
• IK 10 impact tested.
• IP 65 weather resistant.
• Easy to use.
4. HANDLING PRECAUTIONS
• Install the unit in locations where the temperature is between –10 and +50°C and the moisture is less than
90%RH (no dew condensation must be formed).
• To clean wipe with a dry cloth. When the unit gets very dirty, use a cloth damped in a neutral cleanser.
Never use benzene, thinner, alcohol, or chemically-treated cleaning cloth because such volatile liquids could
deform or discolor the unit.
