Toa PC-2268 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 12

Toa PC-2268 Скачать руководство пользователя страница 4

4

2. GENERAL DESCRIPTION AND FEATURES

The PC-2268 is a surface-mount speaker with rated input of 6 W (100 V line application) designed for ceiling
surface or wall surface installations. With the additional use of an electrical box, it can be installed to the
location where no wall or ceiling is available for mounting.

• Compact and attractive design to blend in with interior spaces.
• Rear-closed structure with a rear cover keeps performance and sound quality constant regardless of

installation location.

• The push-in type input terminal provides an easy cable connection and allows bridge wiring.
• The input power change can be made easily by changing the tap position of the transformer.

3. NOMENCLATURE

[Inside the rear case]

Cable entry opening
(ø30 mm)

Input terminal

Intermediate connector

Reinforcement bracket

Knockout holes

[Side]

Positioning mark ( )

Positioning mark ( )

Lock lever

Rear case

Front case

Matching transformer

[Inside the front case]

Intermediate connector

Safety wire

Speaker unit

Note

Open these holes when the cable
entry opening in the center of the rear
case cannot be used at installation.

«
...
2
3
4
5
6
...
»

Содержание PC-2268













Отзывы:

Нет отзывов