Toa PC-2268 Скачать руководство пользователя страница 3

3

When Installing the Unit 

• Never install the speaker in humid or dusty locations, in locations exposed to direct sunlight, or near heaters

as doing otherwise may result in fire or electric shock. 

• To avoid electric shocks, be sure to switch off the amplifier's power when connecting speakers.

• The speaker front and rear cases are secured with adhesive tape (2 points) at both sides when shipped from

the factory. Remove the tapes while placing the speaker on a stable surface or while supporting it with hand.
Failure to do so may cause the case to fall, resulting in material damage and possible personal injury. 

When the Unit is in Use 

• Do not operate the speaker for an extended period of time with the sound distorting. Doing so may cause the

speaker to heat, resulting in a fire. 

• Do not stand or sit on, nor hang down from the speaker as this may cause it to fall down or drop, resulting in

personal injury and/or property damage.

• Have the speaker checked periodically by the shop from where it was purchased. Failure to do so may result

in corrosion or damage to the speaker or the mounts that could cause it to fall, possibly causing personal
injury.

Indicates a potentially hazardous situation which, if mishandled, could
result in moderate or minor personal injury, and/or property damage.

CAUTION

Содержание PC-2268













Отзывы: