Seal the panel edges.
N-8033MS
YC-841 or electrical box
YC-841 bottom
A
coustic material (
accessory
)
Note
Lay it down along the inside of the box.
Machine screw M4 x 35
(
accessory
)
Wall surface
Knockout holes
Note
Remove either of the 2 knockout
holes in the bottom so that it can
work as a weep hole (to allow
water to exit), and secure the
YC-841 to a wall.
After installing the N-8033MS,
check if conversations can be
made, then adhere both ends
of adhesive sheet to the panel
by removing exfoliate paper.
Flush-Mount Master station
Thank you for purchasing TOA's Flush-Mount Master Station.
Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.
n-8033Ms
installation Manual
1. General DesCriPtion
The N-8033MS is a flush-mount master station designed to operate in conjunction with TOA IP Intercom Exchange and
features high quality hands-free conversation.
Using an optional YC-841 Wall-mount box, this station can be mounted on a wall.
Connecting a foot switch or other external switch to the external dial input terminal permits one-touch dialing operation by
way of such switches.
2. Wall MountinG
2.1. in-Wall Mounting using an electrical box
Attach the N-8033MS to
the YC-841 Wall-mount box or an electrical box installed in a wall.
note
When installing the N-8033MS outdoors or at locations where it gets wet with water, tightly
seal the panel edges. For sealing method, consult your TOA dealer.
tip
Refer to the next
page for YC-841
d i m e n s i o n a l
drawing.
