CTRL ROOM SOURCE
23. DIGITAL EFFECTS
It displays the selected preset.
24. PROGRAM
Adjust this knob to select the right effect you wish to
perform. There are totally 100 options for you: Echo,
Vocal, Plate and versatile two-effect combination.
When you are satisfied the right preset, please push
this knob to store this preset you want.
25. DFX/MUTE
Disables the internal effects processor; in this case
the red "PEAK" LED will be lit permanently.
26. DFX TO AUX SEND 1-2
The both rotary knobs assign the DFX signals to their
respective AUX SEND outputs.
27. AUX SEND CONTROLS
These four controls are used to determine the master AUX SEND levels, which can be varied from -∞to +10 dB.
When the external effect units which have no input gain control were connected to mixer, you can get a further
+10 dB gain available from these Aux Send outputs.
As to the AUX4, it can also provide the necessary level adjustment for the internal effect signal.
28. DFX OUT
These control is used to determine the internal DSP module levels and DFX sends output, which can be
varied from -∞ to +10dB
29. DFX TO MAIN
This control is used to assign the signal from DFX to MAIN MIX output.
30. OUTPUT LEVEL
This stereo 12 segments LED meter will be indicate the level of overall output signal.
31. MAIN / GR
If you release the MAIN/GR button, the signal will be come from the MAIN MIX output, it will not be affected
by pressing the GR1/2 / GR3/4 button. When you push down the MAIN/GR button and press GR1/2 / GR3/4,
the signal will be come from the GR3/4 output. When you release the GR1/2 / GR3/4, the signal will be come
from the GR1/2 output.
23
24
27
33
32
31
25
28 29
26
30
32. PHONES CONTROL
This control is used to adjust the signal present at the phones output, which can be varied from
-∞ to +10 dB.
33. CONTROL ROOM CONTROL
This control is used to adjust the signal present at the control room output, which can be varied from -∞ to
+10 dB.
8
