6. POWER AND LEVEL ADJUSTMENT
NOTE:
Before connecting MICs or instruments, make sure that the power of all your systems components
including the mixer is turned off. Also, make sure that all input and output controls of your mixer are turned
down. This will avoid damage to your speakers and avoid excessive noise.
Properly connect all external devices such as MICs, power mplifiers, speakers, effect processor etc.
MUSIC AUDITION
Adjust the volume from very small to loud slowly, after you confirm the sound is normal then make it more
louder. When the speaker output is close to its limit, the PEAK light will lights up and you should turn down
your volume now, don't let the PEAK lights on long time, it means over load, may damage the system.
P
OWER ON
Peripheral devices
Source
Mixer
Power Amplifier
POWER OFF
40
1
8
1
5
1
2
9
6
3
0
CLIP
0
Mixer
Processor
Put the CH
output to 0dB
LEVEL
CH
MAIN
Adjust the
input level of
processor lik
the above
picture
40
18
15
12
9
6
3
0
CLIP
INPUT
LEVEL
VOLUME LEVEL ADJUSTMENT
Adjust EQ
Adjust PAN/BAL
Put the main
output to 0dB
Processor
Amp
Mixer
The main output
amplitude set
should be
displayed
as: 0dB
Adjust the output level of
processor, the range like
the above picture shows.
Adjust the volune knob
and make the output level
within the range as above
picture shows.
Then adjust the input
gain to make the main
output less +4dB.
LEVEL
LEVEL
GAIN
OUTPUT
LEVEL
GAIN
EQ
PAN/BAL
Adjust input
gain
11
