background image

2

1. SAFETY PRECAUTIONS

• Before installation or use, be sure to carefully read all the instructions in this section for 

correct and safe operation.

• Be sure to follow all the precautionary instructions in this section, which contain important 

warnings and/or cautions regarding safety.

• After reading, keep this manual handy for future reference.

Indicates a potentially hazardous situation which, if mishandled, 

could result in death or serious personal injury.

WARNING

Indicates a potentially hazardous situation which, if mishandled, could 

result in moderate or minor personal injury, and/or property damage.

CAUTION

WARNING

When Installing the Unit
• Do  not  expose  the  unit  to  rain  or  an 

environment where it may be splashed by 

water  or  other  liquids,  as  doing  so  may 

result in fire or electric shock. 

When the Unit is in Use 
• Should  the  following  irregularity  be  found 

during use, immediately cut off the power 

supply from a PoE+ or PoE switching hub 

and contact your nearest TOA dealer. Make 

no further attempt to operate the speaker 

in this condition as this may cause fire or 

electric shock. 
· If  you  detect  smoke  or  a  strange  smell 

coming from the unit

· If water or any metallic object gets into the 

unit 

· If the unit falls, or the unit case breaks 

· If the LAN cable is damaged (exposure of 

the core, disconnection, etc.)

· If the speaker suddenly stops producing 

sound

• To  prevent  a  fire  or  electric  shock,  never 

open  nor  remove  the  unit  case  as  there 

are  high  voltage  components  inside  the 

unit. Refer all servicing to qualified service 

personnel.

• Do not touch the unit and LAN cable during 

thunder and lightning, as this may result in 

electric shock.

• To prevent the electromagnetic wave from 

badly influencing medical equipment, make 

sure  to  switch  off  the  unit's  power  when 

placing it in close proximity to the medical 

equipment.

CAUTION

When Installing the Unit
• Avoid installing the unit in humid or dusty 

locations, in locations exposed to the direct 

sunlight,  near  the  heaters,  or  in  locations 

generating sooty smoke or steam as doing 

otherwise  may  result  in  fire  or  electric 

shock. 

• Avoid touching the unit's sharp metal edge 

to prevent injury.

Содержание IP-A1AF

















Отзывы: