Toa HF-250M, Руководство по эксплуатации

Страница: 14 / 32

5. His-own-station number registration
When using the HF-250M with the EX-200 exchange or without the EX-6000 series exchange in
conjunction with the DT-E70 Data transmitting unit, make sure "his-own-station number" appears on the
LCD display.
Switch the [REGISTER] switch ON, displaying on the LCD display.
Press the dial key
Press the
Press the
, displaying
key, displaying
key, displaying
Enter "his own station number" with the dial keys (
displayed as dialed. Example : ), and "his-own-station number" is
To cancel a misdialed number, press the
key and repeat the procedure from step
Press the
display to
key after the correct "his-own-station number" is displayed, changing the
Switch the [REGISTER] switch OFF.
Both the auto-dialer key's A and B page status and "his-own-station number" are displayed.
Note : If the HF-250M is used without being connected to a DT-E70 unit, only the auto-dialer's A and B
page status and a fixed time "1:00" are displayed. The time display can not be reset because no
clock data is being received from a DT-E70 unit.
6. Calling
(1) Ensure the [REGISTER] switch is switched OFF.
(2) Dial a station number with either the dial keys or an auto-dialer key.
7. Answering
key OFF
Conversation can begin immediately after the calling tone stops. The handset may be used for
confidential conversations.
key ON
The switch of the exchanges permit selection of two conversation modes.
Privacy function OFF
When the continuous calling tone sounds, the call can be answered by either lifting up the handset
or pressing any one of dial keys (
Privacy function ON
Only a brief privacy tone sounds when called. To answer, lift up the handset or press any one of the
dial keys (
- 1 4 -