7
Step 6.
Mount the speaker.
Caution
Before mounting, check to be sure that the speaker's
4 mounting tabs are turned inside the unit as shown in
the figure.
If turned outward, the speaker cannot be inserted
through the mounting hole.
In
Out
Mounting tab
6-1.
Insert the speaker through the mounting hole till it contacts the ceiling panel.
While doing so, avoid directly touching the speaker's
diaphragm and tweeter.
WARNING
Never grab the tweeter section as a hand hold.
The speaker could fall due to damage, resulting
in possible personal injury.
Tweeter section
Tweeter section
Mounting hole
Step 5.
Make speaker cable connection.
5-1.
Plug the wired detachable input connector into the speaker's wiring socket.
5-2.
Fix the speaker cable with the cord clamp.
Speaker unit
Detachable input
connector
Cord clamp
Cord clamp
Speaker cable
Clamp fixing screw (2 pieces)
Loosen the cord clamp fixing screws and open the cord clamp.
Then, pass the speaker cable between both screws.
Tighten the clamp fixing screws to
fix the speaker cable with the cord clamp.
Confirm the connector will not pull out.
Pull on the cable here to confirm that
speaker cable is securely fixed.
Detachable input connector
5
-1
5
-2
