Toa DX-0808 Скачать руководство пользователя страница 4

Страница: 4 / 12

[FRONT POCKET]

Communications port selection switch [PORT]

This switch is used to select the communications port your computer is connected to. RS-232C is valid only

when controlling a single unit, and the front- or rear-mounted D-SUB connector can be used. Use RS-485

when controlling multiple units. XLR connectors for RS-485 are mounted on the back of the unit.

System locking switch [LOCK]

Use this switch to set how the hardware is locked.

OFF : All functions are available (unlocked), such as memory switching.

1 : All functions are locked except memory switching.

2 : All

front

panel facilities are locked.

Note

Make sure the power is switched ON when you use this switch.

RS-232C communications port [RS-232C]

This is a 9-pin D-SUB connector for RS-232C communications, and can only be used when the

communications port selection switch is set to "RS-232C". This port is connected in parallel to the

rear-mounted D-SUB connector for RS-232C. For details, refer to p.6 "6. PERSONAL COMPUTER

CONNECTIONS".

Unit ID number setting key [SET UNIT ID No.]

Use this key to set the unit ID number. For details, refer to p.8 "8.UNIT ID NUMBER SETTING".

Содержание DX-0808












