9
2. Connect a coaxial cable to the camera's BNC output terminal.
When operating on 24 V AC or 12 V DC, connect the power cable wires to the camera power input cable
(Red, Black).
3. Fix the camera unit to the ceiling or wall using the four mounting screws.
Attach the supplied base gasket to the camera unit, then install the camera unit to the ceiling or wall. Since
no mounting screws are supplied with the camera, prepare them separately depending on the situation.
(Use screws that are over 4 mm (0.16") in nominal diameter and longer than 25 mm (1").)
Base gasket
Note
The cable trench and four camera mounting holes must be protected with silicone sealant material to prevent
rainwater from leaking into the enclosure. Do not waterproof other holes.
Sealant material (4)
Sealant material
[Cable trench]
[Camera mounting holes]
