background image

INSTRUCTION MANUAL

COAXIAL AUDIO ADAPTER

C-AP105

Thank you for purchasing TOA's Coaxial Audio Adapter. Please carefully follow the instructions in this
manual in order to ensure long, trouble-free use of your equipment.

1. SAFETY PRECAUTIONS  .......................... 2
2. LIST OF INCLUDED COMPONENTS

AND PARTS  .............................................. 4

3. GENERAL DESCRIPTION  ........................ 4
4. HANDLING PRECAUTIONS  ..................... 4
5. NOMENCLATURE AND FUNCTIONS

Front Panel  ................................................. 5
Rear Panel  ................................................. 5
Microphone ................................................. 6

6. CONNECTOR WIRING

6.1. Matching cable size 

and stripped cable ends ................ 6

6.2. Cable Connections ............................... 6

7. CONNECTIONS 

7.1. Power Supply Connections .................. 7

7.2. Audio Input Connections ...................... 7
7.3. Audio Output Connections ................... 8
7.4. Speaker Connections ........................... 8
7.5. Contact Input

and Output Connections ................ 8

7.6. AP Line Connections ............................ 9
7.7. Video Equipment Connections ............. 9

8. INSTALLATION 

8.1. Rack-mounting units ............................. 9
8.2. Rack-mounting two units .................... 10
8.3. Wall Mounting ..................................... 10
8.4. Microphone Attachment ..................... 10

9. IF A FAILURE IS DETECTED

(TROUBLESHOOTING) ............. 11

10. SPECIFICATIONS  .................................... 12

TABLE OF CONTENTS

Содержание C-AP105













Отзывы: