46
13.6.1. Setting flow chart
The screen display examples shown below may differ from actual displays.
The on-screen indications shown in red here (actually shown by flashing cursors) are parameters or setting
contents to be selected with the Parameter setting knob, input channel selection key or other designated keys.
The indications of the [ ], [ ], [
], and [
] arrows represent that the screen is switched with the Screen
shift key.
Unless otherwise specified, use the Parameter setting knob for each parameter selection.
E V E N T – S E T T I N G
E V E N T
0 1
N O N E
E V E N T 0 1
N O N E
Event classification setting
E V E N T 0 1
R O U T E
(When Event classification is
set to ROUTE)
Event classification setting
E V E N T 0 1
I N 1
E V E N T 0 1
O U T 1
E V E N T 0 1 T R I G
C – I N 0 1
E V E N T 0 1
S Y N C
O N
E V E N T 0 1
C O U T 0 1
Trigger setting
Interlock output control ON/OFF setting
Interlock output terminal setting
(When the interlock output control is ON)
Setting menu screen
E V E N T 0 1
B G M E N D
(When Event classification is
set to BGM END)
Event classification setting
E V E N T 0 1 T R I G
C – I N 0 1
E V E N T 0 1 T R I G
C – I N 0 1
E V E N T 0 1
B A S E
(When Event classification is
set to BASE)
E V E N T 0 1
B A S E
0 2
BGM Event number selection
Event classification setting
T R I G G E R =
L E V E L
(When Trigger is set to the control input C-IN terminal)
(When Trigger type is set to PULSE)
Busy input terminal setting
B U S Y – I N
N O N E
UTILITY
MEMORY
Normal use state
PARAMETER
Press for over 2 seconds.
PARAMETER
PARAMETER
PARAMETER
To select,
INPUT SELECT
1 – 8
To select,
OUTPUT SEL
To determine,
ON/OFF
13.6. Event Setting (Only in the normal matrix operation)
Содержание A-9060DH
Страница 136: ...200610 CU ...
