EN
12
■
Should the motor unit fall into water, switch off the power supply immediately. Do not
attempt to retrieve the connected device from the water!
■
Never touch the motor unit, the mains cable or the mains plug with wet hands.
■
Only connect the device to a plug socket that is properly installed and matches the
technical data of the device (see the "Technical Data" chapter). Only use suitable
extension cables whose technical data is the same as that of the device.
■
Position the mains cable in such a way that it does not become squashed or bent and
does not come into contact with hot surfaces.
■
Remove the mains plug from the plug socket if a fault occurs during operation or
before a thunderstorm.
■
Always pull the mains plug and never the mains cable.
Avoiding Damage to Material, Property and the Device
■
Always check the device for damage before putting it into operation. The device should
only be used when it is fully assembled, undamaged, and in working order!
■
Do not use any additional accessories! Only the accessory parts supplied by the
manufacturer should be used.
■
Do not drop the device or subject it to heavy impacts.
■
Do not expose the device to extreme temperatures, wide temperature variations, wet
conditions or direct sunlight.
■
Make sure that the device remains stable during operation.
■
Do not use the device for longer than 1 minute without interruption to prevent
overheating. Allow the device to cool down for a short time before using it again.
■
Do
not
clean the motor unit in the dishwasher!
For Your Health
■
The device may contain production residues. To avoid harmful effects to your health,
clean the device thoroughly before you
fi
rst use it (see the "Cleaning and Storage"
chapter).
■
Clean the device and the accessories immediately after each use to prevent germ
formation. Do not allow food residues to dry on.