- 11 -
T
O CHARGE THE HEADSET
• Please note: charge your new headset for 6h before use.
Connect the headset to your computer's USB port using the USB cable
supplied. During charging, the LED is lit and then switches off once the
battery is recharged. Approximate charging time: 2/3 hours.
NB: When the battery is low, the red LED flashes and the headset emits
a warning signal.
T
O TURN THE HEADSET ON
/
OFF
ON : Press the call button until the blue LED blinks rapidly then turns off.
The headset is switched on.
OFF : Press the call button until the red LED blinks rapidly then turns off.
The headset is switched off.
T
O PAIR THE HEADSET WITH yOUR TELEPHONE
1) make sure that the headset is turned off.
2) Press the call button until the red and blue LEDs flash. The headset is now
in pairing mode.
3) Enable your phone's Bluetooth function and start the device search (see
your phone's instructions).
4) Select the BTHF01 headset from the list of devices offered on your phone.
5) Depending on the model, either the phone connects automatically, or you
have to enter the password 0000. When pairing is successful, the blue LED
blinks 3 times.
your phone will recognize the headset automatically when it is switched on.
To pair the headset with another phone, repeat procedure 3 with the new
phone that you want to associate with the headset.
U
SE
To use the headset, it first must have been paired with your phone
(cf previous paragraph "To pair the headset with your telephone").
• To connect the phone to your headset.
1) Turn on the headset.
2) Enable your phone's Bluetooth function. The phone recognizes the
headset automatically.
• To receive a call or hang up.
Press the call button on the headset once.
• To make a call.
1) make sure that the phone you want to use and the headset are
paired.
2) Dial the number and start the call from your phone.
• To make a call using the voice recognition function (only for phones
with voice recognition).
1) make sure that the phone and headset are paired.
2) Press the call button on the headset. you will hear a beep.
3) Say the name of the person you want to call (see your phone manual).
• To switch a call in progress from your phone to the headset.
Press the call button on the headset for approximately 3 seconds until
you hear a short beep.
The conversation switches directly to the headset.
• To switch a call in progress from the headset to your phone.
1) During the call, press the button on the headset for 3 seconds.
2) When you hear the beep, release the button.
The conversation is transferred to the phone.
EN
new use BTHF01_toflashat100% 29/10/12 16:38 Pag
