Made In China
ASSEMBLY INSTRUCTIONS
ASSEMBLY
REQUIREMENTS
2 HOURS
Assembly Time
(Approximate)
2 -Person Assembly
Tools Required (Not Provided):
Phillips Screwdriver
Flat Head Screwdriver
Thank you for purchasing our product!
1/11
ASSEMBLY PREPARATION
1. Remove all packaging materials, staples and packing straps from the carton.
2. Refer to Parts List and Hardware List , and ensure parts and hardware are complete before you start assembly.
Contact customer service for missing parts.
3. Place all wooden parts on a clean, flat and soft surface (e.g. carpet or rug) to prevent parts from getting scratched.
SAFETY PRECAUTION:
1. KEEP ALL HARDWARE PARTS OUT OF REACH OF CHILDREN.
2. DISPOSE PLASTIC PACKAGING MATERIAL IMMEDIATELY TO AVOID ANY RISK OF SUFFOCATION TO
CHILDREN AND ANIMALS.
TIPS FOR ASSEMBLY:
1. Allow ample room for assembly and in close proximity to where product will be placed.
2. Assemble the product on a surface that does not scratch or damage the exterior gloss and finish of the furniture.
3. Check all of the parts and quantities are included before assembly.
4. Identify all of the parts, hardware and quantities required for each step.
5. During assembly, do not over-tighten any fittings as this may cause damage.
6. DO NOT USE POWER TOOLS TO ASSEMBLE THIS PRODUCT.
7. Always place the product on a flat, level surface.
8. Do not sit or stand on the partially assembled product; only use the product for which it is intended.
CARE AND MAINTENANCE
CLEANING - Use a slightly damp cloth to clean the product. Do not use bleach or abrasive cleaning material.
FITTINGS - Check all the fittings periodically and re-tighten as necessary. Do not use the product if any of the parts is
damaged or broken.
This product is for indoor and household use only - not for commercial use.
2 DRAWER FILING CABINET
Please refer and use this assembly instruction to assemble the product.
Contact our customer service department in case there are any missing or damage parts or hardware.
We appreciate your business!
