Insert Drawers.
TO REMOVE DRAWER FROM THE CABINET
a) Slide out the drawer until the Disconnect Lever is visible on F1 on the Left and Right Side of the
drawer.
b) Push DOWN the Disconnect Lever on the Right Drawer Glide (F1) and Push UP the plastic
Stopper on Left Drawer Glide (F1) at the same time and continue to pull out the drawer.
STEP 11
11/11
F1
F2
To insert Drawers:
a) On the Side Panels of the cabinet, bring the ball-bearing slider on Drawer Glide
Track (F2) forward to the front edge of (F2) i.e. towards drawer opening of the desk.
b) Align the back open-end of the Drawer Glide Runner (F1) on each side of the drawer to fit
squarely into the groove on the open front-end of (F2) on the Side and Middle Panels. Be
sure the drawer/F1 is not tilted or angled, and gently push in drawer squarely.
c) When the drawer is pushed in about half way, the Disconnect Lever on (F1) will be engaged
onto (F2) which will make pushing in the drawer again to engage the Lever to the slide
mechanism on (F2). The drawer should now slide smoothly.
d) If the drawer cannot be pushed in or stuck, do not force it in. Remove the drawer and repeat
the steps above.
X2
The assembly of th
is
2
-D
rawer
F
iling
C
abinet is complete.
