TMS Lite
LC-18-1CH-X10 & 2CH-X5 CONTROLLER UNIT
10
6.
Each tab display all the parameters for each slave board.
7.
Display controller part number.
8.
Slave board firmware version.
9.
Strobe function for slave board:
a.
Repeat strobe for all 4 channel.
b.
Strobe once
10.
Tick the checkboxes to set the address
(Address must be same as the ADDR setting on the controller).
11.
Choose the channel to be strobe.
12.
Save current slave board parameter to EEPROM.
13.
Channel mode :
a.
Constant
b.
Strobe
c.
Trigger
14.
Channel parameter :
a.
Current Multiplier (1 - 10)
b.
Light Intensity (0 – 255)
c.
Strobe Delay (0 – 9999) = (0 – 99.99 ms)
d.
Strobe Width (0 – 9999) = (0 – 99.99 ms)
e.
Output Delay (0 – 9999) = (0 – 99.99 ms)
f.
Output Width (0 – 9999) = (0 – 99.99 ms)
