TMS Lite
LC-18-1CH-X10 & 2CH-X5 CONTROLLER UNIT
9
LC-18 Software
The controller can be controlled using LC-18 software. Connect the controller to computer
with RS232 cable and TCPIP cable.
LC-18-2CH-X5 (2 Channels only)
1.
Software Connection :
a.
Select COMPORT or TCPIP to connect.
b.
Disconnect the software
2.
Read and Save function for all slave board :
a.
Read all slave board’s parameter from controller.
b.
Save all slave board’s parameter into EEPROM.
3.
Strobe function for all channel :
a.
Strobe all channel once.
b.
Repeat strobe all channel (together).
c.
Repeat strobe channel by channel.
4.
Reset all channel’s parameter to default value.
5.
Master board firmware version.
1
2
3
4
5
6
7
8
12
9
10
11
13
14
