7
Designed and manufactured in the USA with pride by TMIO, LLC • Chattanooga, TN • US toll-free +1.800.881.TMIO (8646) • www.tmio.com
Connect Io
TM
, Intelligent Oven
TM
, Intelligent Ovens
TM
, Green Clean
TM
, and TMIO
®
are registered trademarks of TMIO, LLC.
1
2
3
4
STEP 1. Unpacking the Oven
INSTALLATION STEPS
j
Make sure to TURN OFF the breaker for the
oven power supply.
WARNING: Use two or more people to move and
install oven. Failure to follow this instruction can
result in back injury or other injury.
k
Move the oven close to final installation
position prior to removing packaging materials.
WARNING: Never use door handles or any portion
of the control panel or trim for lifting the oven. This
may cause severe damage to the product.
l
Carefully remove plastic wrapping,
polystyrene protectors, cardboard, and blue tape.
Exercise care if using a knife or sharp object to
cut plastic or tape in order to prevent permanent
damage to the stainless steel surfaces.
m
Remove the four (qty. 4) screws from the
shipping brackets located on both sides of the
oven. Replace the four screws after removing
the brackets.
!
!
Carefully remove all packing
material from unit
Remove four (qty. 4) screws
from shipping brackets
i
Do not discard finish
trim. See page 12 for
installation instructions.
CAUTION: Remove door before removing unit from shipping pallet.