TMIO Connect IO Professional Series, Руководство по установке, Страница: 6 / 15

6
Designed and manufactured in the USA with pride by TMIO, LLC • Chattanooga, TN • US toll-free +1.800.881.TMIO (8646) • www.tmio.com
Connect Io TM , Intelligent Oven TM , Intelligent Ovens TM , Green Clean TM , and TMIO ® are registered trademarks of TMIO, LLC.
CABINET CUTOUT DIMENSIONS:
•
51 1/8” (129.9 cm)
of cutout height required.
• 30” (76.2 cm) minimum cabinet width required;
33” (83.8 cm) cabinet width recommended.
• 24” (60.9 cm) cutout depth required.
• 28 5/8” (72.7 cm) cutout width required.
WEIGHT & ORIENTATION:
The bottom of the cabinet should be level and must be
capable of supporting 425 pounds (193 kg).
SECURING OVEN TO CABINET:
To secure the oven into the cabinet, attach the oven
vertical side trim to the surface of the cabinet using the
eight (qty. 8) Phillips cabinet mounting screws provided.
ELECTRICAL LOCATION:
Make a cutout for the electrical supply at the UPPER
LEFT of the cabinet,
using the cabinet front as the
origin point of reference
. See figure (right) .
INTERNET CONNECTION LOCATION:
If the home has CAT5 cabling, install a cable at the
back of the cabinet and make a cutout at the UPPER
RIGHT,
using the cabinet front as the origin point of
reference . See figure (right) . The back of the oven
has a built-in RJ45 network connector and two 120V
electrical outlets for plugging in network devices such
as routers, adaptors or wireless bridges.
See Product
Dimensions (page 4).
CABINET REQUIREMENTS
Cabinet Cutout Diagram
2” (5.1 cm) minimum
top of cutout to
bottom of upper
cabinet door
30” (76.2 cm) minimum
cabinet width; 33” (83.8 cm)
recommended
51 1/8” (129.9 cm)
cutout height
28 5/8” (72.7 cm)
cutout width
24” (60.9 cm)
cutout depth
RJ45 cutout 2”
(5.1 cm) from
cutout top
electric cutout
2” (5.1 cm) from
cutout top