TMG TMG-HW28, Руководство по эксплуатации продукта

Страница: 4 / 41

WARNING: Keep water
spray away from electrical
wiring.
4. All electrically powered equipment must be grounded at all times
to prevent fatal electric shots. Do not spray water on or near
electrical components. Do not touch electrical components while
standing in water or when hands are wet. Always make sure
machine is disconnected from power source before servicing.
WARNING: Risk of
injury. Hot surfaces
can cause burns.
WARNING: Hot discharge
fluid. Do not touch or
direct discharge stream at
persons.
WARNING: Risk of fire. Do not add
fuel when operating machine.
3. Never use gasoline, crankcase draining, or waste oil in your
burner fuel tank. Never run pump dry or let the pump run with the
trigger gun released for more than 2 minutes. The minimum
clearance to any combustible material is 12 inches.
.
WARNING: Risk of injection
or severe injury to persons.
Keep clear of nozzle spray.
6. High pressure spray can cause serious injuries. Never point
pressurized spray at any person or animal. Handle the spray
assembly with care.
5. Use equipment in a well-ventilated area to avoid carbon monoxide
poisoning or death. This machine must never be connected to a
Type B gas vent.
WARNING: Risk of asphyxiation.
Use this product only in a well
ventilated area.
WWW.TMGINDUSTRIAL.COM P04/41 Toll Free:1-877-761-2819