Tmed i37, Инструкция по эксплуатации

Страница: 11 / 40

5. Heart Rate Measurements
5.1 Precautions to Consider while Measuring your Heartbeat:
Your measurement results may be incorrect if the band is moved and/or
is not secured to your wrist during your heartbeat measurement.
A more accurate result will be displayed if the band is secured to the
upper section of your wrist.
Be sure to have the band secured to your wrist during the entire
duration of your heartbeat measurement.
Be sure there is nothing in between your wrist and the band during the
time you are taking your measurements.
It usually takes about 20 – 40 seconds for your heart rate data to be
detected and displayed for your review.
5.2 How to Measure your Heart Rate:
9
Briefly hold the button and release when activating the heart rate
mode. It will take about 20-40 seconds to obtain your heart rate
results. If you do not release the button, the heart rate function will
not be turned on. When turning the heart rate function off, hold the
button until you see your heart rate data flicker, then release to turn it
off.
Note: After the heart rate mode is activated, it will vibrate after 5
minutes and again at 10 minutes to remind you it is on.