Once you have set your program, you can see a demo of your settings by pressing . This will run
through the 24 hour photoperiod in just over 2 minutes (1 second = 10 minutes of the cycle.
NOTE:
If the total number of hours in your photoperiod is less than 24 hours then the light will turn off
after the moonlight phase and will come on again at the start time. If the total is more than 24 hours then
the part over 24 hours will be overridden by the dawn at the set start time.
Daylight Recommendations
The suggestions below are for guidance purposes only. Corals can be kept in deeper aquariums. Please
note that it is up to you to ensure that your corals receive the correct amount of light. Refer to your
local fish store if you are unsure.
Small Polyp Stony Coral
All channels 100% (32) for 60cm+ deep tanks
All channels 90% (29) for 45cm deep tanks
All channels 75% (24) for 30cm deep tanks
Large Polyp Stony Coral
All channels 75% (24) for 60cm deep tanks
All channels 65% (20) for 45cm deep tanks
All channels 55% (17) for 30cm deep tanks
Soft Coral
All channels 65% (20) for 60cm deep tanks
All channels 55% (17) for 45cm deep tanks
All channels 45% (14) for 30cm deep tanks
Factory Settings
To reset to the factory settings press then
O
C/
O
F/
W
RESET
CYCLE
DEMO
C
Functions
Buttons
Start Time/
Set Brightness
Duration
White
Blue
Colour Mix
Light Start time
05:00
-
-
-
(start time)
Dawn duration & colour
02:00
Sunrise duration & colour
01:00
Daytime duration & colour
10:00
Sunset duration & colour
02:00
Moonlight duration & colour
03:00
START
1A 01
1
b
01
2
b
05
3
b
28
4
b
10
5
b
10
1C 01
2C 28
3C 28
4C 30
5C 02
2A 10
3A 28
4A 15
5A 02
8
V2iLumenAir 900-1200 instructions multilingual v2-2014 REWORKED FINAL_Layout 1 25/07/2014 12:28 Page 10
