3
The versatile, compact design of the V
2
Bio React Pellet Reactor allows it to be installed
internally in a sump or aquarium or externally as a stand alone ‘hang-on’ unit.
ASSEMBLY AND INSTALLATION
The V
2
Bio React Pellet Reactor is supplied almost fully assembled. After unpacking and before
installation you must:-
Step 1
Thoroughly rinse the V
2
Bio
React Pellet Reactor with
fresh water.
Step 3
Position and secure the water inlet pipe
assembly (12).
Step 4
Ensuring that the
filter lid ‘O’ ring (4)
is correctly
positioned, replace
the filter lid (3) and
securely hand
tighten - failure to
do so will result in
leaks.
Step 2
Locate and correctly position the sponge
(11) on the filter lid (3).
V2Bio React instructions multilingual v1-2012_Layout 1 27/02/2012 15:22 Page 5
