ProPlex SceneSwitch 8 user manual version 1.9 11 June 2021
9
To activate any of the pre-programmed presets, press the desired preset button for less than
one second. The active preset button will glow at 100% intensity. Several presets may be
activated simultaneously. To turn off the preset, press the preset button. The LED status
indicator will switch to 20% intensity when the preset is inactive.
E
RASE
A
LL
P
RESETS
To delete all information in all of the memory buttons:
Press and hold buttons No. 1 and No. 8 until LED status indicators blink for a short time. All
memories are erased and all LED status indicators are turned off.
LED
S
TATUS
I
NDICATOR
P
OSITIONS
SceneSwitch 8 preset buttons have 3 indicating LED brightness positions:
•
OFF – Memory button is "empty" (no recorded presets)
•
Turned on at 20% -- Preset is recorded
•
Turned on at 100% -- Preset is active
S
WITCHING
B
ETWEEN
I
NPUTS
A
AND
B
To switch between A and B inputs, turn the switch to either A or B. LED indicators will activate on
either A or B to indicate which input is active.
NOTE: Preset switch must be turned OFF when using DMX inputs as the DMX signal source.
