- 3 -
Menu Map
Level 1
Level 2
Level 3
Level 4
Notes
Node setup
Node name
Node name
Label
Enter node name label.
Universe
format
In this menu you can set the universe
format for your needs.
Base 16 (0-15)
Hex (0-F)
Decimal (0-32767)
Screen lock
time
Time after which the screen will
automatically get locked.
0, 5-600
0- off
5- minimum
600- maximum
Values in seconds
LCD/ LED
brightness
Adjust LCD and LED brightness settings
for your needs.
Off
Dimmed
Full
Protocol setup
Protocol
Choose out of the 2 possible data
processing protocols.
Art-Net
Art-Net protocol
sACN
sACN protocol
Easy priority
If EASY PRIORITY is ON, when two or
more of the same universes are coming
in to the node, the console with the
higher channel 512 value will have
control over the universe.
Off
On
On source
loss
This setting determines what will happen
on source loss
Hold output
On DMX source loss, holds the last
received DMX values
Blackout
After DMX source loss, all values will be
sent at a value of zero
Stop DMX
After DMX source loss the outgoing
DMX signal will be disabled
Source loss
timeout
This setting determines how long the IQ
Two will wait before using the Source
Loss setting.
VALUE
ArtNet idle
resend
This setting determines the time the IQ
will resend an Art-Net packet even if no
new DMX packet is received (Applies to
ports set to INPUT mode only)
0.5 s
1.0 s
2.0 s
4.0 s
DMX out
refresh rate
The refresh rate for outgoing DMX data
(actions per second)
Adaptive
Adapts to the input data
20Hz
Fixed 20Hz refresh rate
30Hz
Fixed 30Hz refresh rate
