ProPlex IQ One user manual version 1.6.8 122216
10
R
OUTING
S
ETUP
To change DMX routing settings, set individual port directions (IN or OUT) and select Art-Net universe for
each port. Art-Net universe is displayed in two formats – decimal and hexadecimal (hex value is in brackets).
Use Left/Right to select port. To edit, press OK. Left selects direction field, right selects universe field.
Up/Down changes values. Press OK again to save changes made. To exit, press Right until “EXIT” appears,
then press “OK”.
L
OAD
C
ONFIGURATION
To load pre-defined configurations and reset device to its defaults:
1)
Config 1
– Sets ports to inputs and sets universes 0 through 3 for each port.
2)
Config 2
– Sets ports to outputs and sets universes 0 through 3 for each port.
3)
Config 3
– User-configurable preset.
4)
Defaults
– Resets all device settings, including name and network configuration to defaults.
Default name is “ProPlex IQ One” and default IP is 2.1.1.10.
5)
EXIT
-- To exit from main Menu.
Use Left/Right to select configuration. To load, press OK and confirm by selecting YES and pressing OK
again. To exit, press Right until “EXIT” appears, then press OK.
- DMX port 1 -
dir OUT
univ=
1 ( 01 )
- Config 2 -
all OUT univ 0 - 3
