1. Connect the 24V DC power to the power input located in left top corner. The connector should be
wired as depicted in the image below.
2. Connect the DMX signal input to the DMX input in the right top corner. The connector should be
wired as depicted in the image below.
2.1 To pass DMX to another device, connect the DMX cable to the DMX Thru port located in the
right top corner of the unit. The connector should be wired as depicted in the image below.
3. Connect the optically isolated DMX signal outputs to DMX links. The connector should be wired
as depicted in the image below.
