Setting the DMX address
To set the DMX address, use the
<RIGHT>
and
<LEFT>
buttons to select the DMX
address for the lamp to be programmed.
Using the
<UP>
and
<DOWN>
buttons, the lamp can be addressed by the lamp
number to patch in the line. (This automatically chooses the next DMX address
making programming simple and quick.)
When the correct DMX address has been selected, press the
<PROGRAM>
button.
When programming is completed, the HHP will play back a notification sound (if the
volume setting is set at 1 or higher). Confirmation of a successful lamp programming
shows the DMX address changed to the programmed address, and next incremental
address will be displayed below for easy and quick sequential programming. No
intervention is necessary, and lamps can be quickly programmed in succession by
swapping to the next lamp and pressing the program button.
E
xample
– The current DMX address for the connected lamp is 1; the lamp number
in lamp chain is #1. After pressing
<PROGRAM>
button, the HHP will set the DMX
address to 5 (for RGB+W lamps) and the sequence number for a lamp will change to
#2.