TM 105 VENTURA FLEX PL, Руководство пользователя

Страница: 13 / 22

INSTALLING METAL STRAPS
Important:
The wire must be installed completely from the right side to the left side and tightened with
the guitar tuning peg before beginning this step.
REMOVING METAL STRAPS
Once the wire is installed,
the metal straps (on both
sides) are placed
over the
wire.
Close and secure the metal
strap. Lower the tail end
securing the metal strap. It’s important that the tail
end is placed running in the
opposite direction to the
rollers, otherwise it will
encounter the roller and
break the metal strap.
Open the metal straps to unlock
them as shown in the picture
above.
Pull on the straps to have the two
ends separate.
Gently remove the metal strap
and take it out of the black
roller.
12