TM RACING 2010 STROKE 250, Руководство по ремонту

Страница: 68 / 88

64
1a
1d
1e
1a
1a
1b
1a
1c
1
2
1/4
2
2
4
3
4
3
5
7
9
6
8
10
1
11
12
ENGINE DISASSEMBLY
Tighten the screws (1) crosswise, positioning them in the relative housing,
depending on their length.
1a) M5-L25 screw
1b) M5-L30 screw
1c) M5-L65 screw
1d) M5-L45 screw
1e) M5-L50 screw
First screw without tightening with a torque of 8 Nm (0.8 kgm/ 5.9 ft/lb).
2.16 IDLE KICK STARTER REMOVAL (ONLY K.S.)
Remove the transmission cover and the clutch bell as described in the
relative paragraphs.
Release the spring (1) from the relative housing, turn the starter (2) anti-
clockwise by 1/4 of a turn.
Remove the starter (2) complete with spring (3) and washer (4).
2.16.1 Starter dismantling
In sequence, remove the washer (4), spring (3), bush and ratchets (5), the
seeger (6), shim (7), gear (8), shaft (9), bush (10) and the spring (1).
Re-assemble in reverse order to dismantling, paying attention to positioning
the pin (11) of the spring (1) in the relative hole (12) on the shaft (9).