9
To take a reading
The new 1D and 2D scanner can read barcodes on virtually any medium –
paper, plastic cards, mobile phones and LCD displays.
To take a reading, connect a thermocouple sensor to the top of the
instrument and wait for the temperature reading to stabilize. Once the
reading has stabilized, press the
Scan
button.
This will activate the Barcode Scanner and freeze the temperature
measurement.
Scan the barcode, when read the instrument will Bleep.
When the Barcode has been read the temperature, Barcode information,
Date and Time will be logged to the internal memory. Up to 1000 readings
can be stored on the instrument.
Whilst in SCAN mode the instrument will show the total number of readings
taken at the top of the instrument display. After scanning, the display will
revert to showing the time and temperature.
If the scanner is unable to read a barcode, it will automatically time-out after
30 seconds.
To cancel the Scanner
To cancel the scanner, simply press the
Scan
button again.
