7
Setting instrument parameters
Using the TME software, under
Setup
tab, you are able to set the
instrument’s parameters. These are:
1.
Set Time and Date
– the time and date is read from your PC.
To set the time and date, select
Read Time/Date
and then
Set
Time/Date to System
2.
Set Sensor Type –
sets the thermocouple type e.g. K/T
3.
Set Temperature Scale –
sets the temperature scale e.g. °C /
°F
4.
Set Instrument Name –
allows you to identify the instrument
with its own specified name
5.
Set Print Header –
allows you to
assign a heading for the
print reports when using the Bluetooth Printer
Other features include:
Autoswitch on? –
allows you to check to see if the autoswitch
on/off function has been enabled
Battery power? –
allows you to monitor battery life
Once you have set your parameters, you can check that the settings
have been stored by using the
Read
functions. The instrument is now
ready for use.
