172-65256M-00 (VFM-T2) 7 Sep 2001
4
Handling Precautions
This product has been thoroughly inspected before being shipped from the factory.
When the product is delivered, check the exterior for any damage.
This section outlines precautions to be taken when handling the product.
Verifying the Nameplate
This product is assembled and adjusted to
meet each specification. The model and rated
specifications are found on the product
nameplate located on the outside of the case.
Verify the number starting with “VT” on the
sticker located on the display panel and the
number starting with “VFM” engraved in the
Tag. No. space on the nameplate of the VFM
transmitter to which the counter is connected.
Location of Nameplate
u
u
When making inquiries concerning the product, please be prepared to
provide details such as the product name, model, product number and
rated specifications.
Precautions When Transporting the Product
1) To prevent damage from accidents during transport, where at all possible, transport
the product to the installation site in the original packaging in which it was shipped
from TLV.
2) During transport, avoid subjecting the product to strong impacts or shocks.
Precautions When Storing the Product
If the period of time between the when the product is delivered and when it reaches
the installation site is long, special consideration must be given to the possible
occurrence of unexpected accidents. When it is known in advance that the storage
period might be long, be sure to observe the following precautions.
<Caution> After the product has been stored for a long period of no use, it
is likely that an inspection of the internal components is necessary.
Please consult with TLV.
1) Where at all possible, store the product in the original packaging in which it was
shipped from TLV.
2) Select a location for storage that meets the conditions set forth below.
Ÿ
A location in which it will not be exposed to rain or water.
Ÿ
A location in which it is subjected to minimal vibration or impacts.
Ÿ
A location in which it will experience only slight fluctuations in temperature
and humidity (approximately 25
°
C and 65%).
Nameplate
